Omarchy Mirror

Dedicated mirror of Arch core/extra/multilib repositories for Omarchy hosted on Cloudflare R2.

Stable vs edge

The stable mirror is the default for Omarchy. It's located at https://stable-mirror.omarchy.org/, and it typically runs one month behind the very latest. This allows the Omarchy team time to catch any incompatibilities with new libraries or tools, so that problems can be fixed before they're rolled out to everyone. The mirror may be updated more frequently as needed to address security issues or general releases.

The edge mirror tracks the very latest Arch repositories every hour. It's located at https://mirror.omarchy.org/. Omarchy users can switch to this using Update > Channel > Edge in the Omarchy Menu.

Arch Linux ARM: local HTTP staging

Arch Linux ARM pushes to its official mirrors, but their public HTTP repositories can be pulled independently. bin/omarchy-mirror-stage-arm stages packages locally using Python 3.9+ and its standard library. It defaults to the Florida mirror over HTTPS. It does not upload to R2, change existing mirror services, or register an official ARM mirror.

Start by checking the download size:

bin/omarchy-mirror-stage-arm --stage ./stage-arm --dry-run

Then stage the repositories:

# All current aarch64 package repositories: core, extra, alarm, aur
bin/omarchy-mirror-stage-arm --stage /mnt/arch-arm-mirror

# Smaller local test: complete repositories, about 1.6 GiB combined
bin/omarchy-mirror-stage-arm --stage ./stage-arm --repos core alarm aur

# Repeat the same command to verify local packages and download only changes
bin/omarchy-mirror-stage-arm --stage ./stage-arm --repos core alarm aur

# Both currently published architectures, with optional removal of old packages
bin/omarchy-mirror-stage-arm --stage /mnt/arch-arm-mirror \
  --arch aarch64 --arch armv7h --prune

Use --upstream https://another-mirror.example/path to select another mirror root, --workers to change the default four concurrent downloads, and --retries / --timeout to tune requests. Paths retain ARM's layout: aarch64/core/core.db, aarch64/core/<package>, etc. The corresponding pacman mirror pattern is Server = https://your-mirror.example/$arch/$repo. The retired, empty community repository and installation images under os/ are outside this package-mirror scope.

The script reads each .db as the manifest: filename, compressed size, SHA-256, and embedded package signature. These are whole changed packages, not binary patches. It checks the size and SHA-256 of existing packages on every run, downloads missing or damaged packages to temporary files, and renames them into place after verification. Completed downloads survive a failed run; an interrupted individual download restarts on the next run. Detached .sig files are reproduced from the original signatures embedded in the database. The script preserves signatures; pacman verifies their authenticity using the Arch Linux ARM keyring. SHA-256 and signature preservation do not constitute cryptographic signature verification by this tool.

Before publishing local metadata, it checks shared .files entries against .db, finishes every manifest package, and re-fetches both databases and metadata signatures to detect upstream changes during the transfer. An older .db package can be absent from upstream .files; the script reports the set difference and still downloads it. A .files-only record is rejected by default because it may indicate a rolling update. Malformed databases, conflicting metadata, missing manifest packages, and checksum failures stop the run without publishing new databases or advancing freshness. Rerun after a rolling update to reuse completed downloads. Successful syncs preserve .db, .files, .tar.gz aliases, and upstream database signatures as regular files.

Recovery is explicitly for retaining packages while upstream fixes its metadata:

bin/omarchy-mirror-stage-arm --stage ./stage-arm --recover-null-records \
  --allow-files-only aarch64/extra/qemu-system-cris-9.1.2-1-aarch64.pkg.tar.xz

--recover-null-records recovers non-empty, all-NUL .db records only from the exact matching path in a valid .files database. No other malformed content is recoverable. --allow-null-record ARCH/REPO/MEMBER limits recovery to the named, investigated records, so a new all-NUL record fails the run; it is repeatable. --allow-files-only ARCH/REPO/FILENAME permits one exact, independently investigated orphan; it is repeatable and never suppresses shared-package conflicts. If either exception is actually needed, the run retains and verifies all manifest packages and their signatures, reports degraded, and exits 3. It does not publish any database, advance any freshness marker, or prune any package. Existing metadata remains untouched and may already contain upstream defects from older script versions. Rerun without exceptions once upstream is corrected.

Pruning is off by default. --prune removes only obsolete package and signature files in the selected repositories, after all selected repositories succeed without recovery. A lock beside the stage prevents overlapping script runs. Disk space is checked before package downloads, allowing 1 GiB of headroom. At most twice the worker count is queued for transfer. --dry-run fetches and validates both databases, hashes existing packages, and reports required downloads; it writes nothing and does not validate package availability. It also exits 3 for degraded metadata and fails for insufficient space.

Each non-dry run writes a schema-versioned JSON report beside the stage (for example, stage-arm.status.json). It records running, failed, degraded, or complete, the selected repositories, manifest hashes, counts, and any recovery/omissions. running or failed never authorizes publication; individual metadata replacements are not transactional and a write failure can leave a mixed tree. Successful runs advance only each selected repository's aarch64/<repo>/lastsync. The old root lastsync is left untouched for compatibility and must not be used as a readiness signal. A partial run reports only its selected repositories; it does not certify the rest of the stage. --json prints the result to stdout, with progress and warnings on stderr. Exit codes: 0 complete or clean dry run; 1 failure; 2 usage; 3 degraded; 130 interrupted.

Treat this directory as a staging tree, not something to serve. Metadata files are replaced individually, so it must not be uploaded during a sync; omarchy-mirror-upload-arm (below) holds the stage lock for that reason.

Initial upstream inventory (September 5, 2026)

Architecture	core	extra	alarm + aur	Package total
aarch64	1.44 GiB	49.01 GiB	0.14 GiB	50.59 GiB
armv7h	1.50 GiB	42.13 GiB	0.19 GiB	43.81 GiB

Allow additional space for database files, updates, and retained old packages. On September 5, 2026, findnewest-0.3-4/desc in Florida's extra.db contained only NUL bytes while its exact extra.files record was readable. The same extra.files contained one stale record for qemu-system-cris-9.1.2-1-aarch64.pkg.tar.xz; the package was absent from both extra.db and the upstream package directory (HTTP 404). These defects block a normal successful sync; the recovery command above can retain packages with an explicit degraded outcome.

The initial local pull verified 311 core, 12,895 extra, 75 alarm, and 12 aur packages (13,293 total, 50.59 GiB in the manifests, 51 GiB on disk). It detected a rolling update, reused 13,291 packages on rerun, fetched two changes, then verified all packages with zero downloads on the next run. Those results establish package integrity and reuse, not healthy metadata: the earlier script preserved the defective upstream extra.db and incorrectly treated recovery as a normal completion. The current strict/degraded distinction fixes that. Pruning remained off, retaining two obsolete packages. The ignored stage-arm/ tree remains local; R2 was not used.

Publishing the ARM mirror to R2

bin/omarchy-mirror-sync-arm is the hourly job: it stages core, extra, alarm and aur with omarchy-mirror-stage-arm, then uploads the stage with omarchy-mirror-upload-arm. ARM has its own buckets and hosts, so the x86_64 prune in omarchy-mirror-upload cannot reach it:

Channel	Bucket	Host
edge	omarchy-mirror-arm	arm-mirror.omarchy.org
rc	omarchy-mirror-arm-rc	arm-rc-mirror.omarchy.org
stable	omarchy-mirror-arm-stable	arm-stable-mirror.omarchy.org

The buckets keep ARM's layout, so the mirror line is Server = https://arm-stable-mirror.omarchy.org/$arch/$repo.

Two options on the stager make it fit for unattended use:

• --keyring FILE checks every package against a gpgv keyring before it is staged, using the signature the database carries. Arch Linux ARM signs every package with one build key (68B3537F39A313B3E574D06777193F152BDBE6A6) and does not sign its databases, so this is the only check that ties a package to its builder. A package that does not verify fails the run and is not retried. Verified packages are recorded by content and keyring beside the stage (STAGE.verified.json), so a package staged before the keyring was given, or under another keyring, is checked on the next run and an unchanged one is not checked twice.
• --publish-degraded publishes upstream's databases unchanged when --recover-null-records or --allow-files-only was needed. The two defects described above have been in extra since at least September 5, 2026, and every Arch Linux ARM mirror serves them; without this option the stage could never publish extra. The exceptions stay explicit: config/arm-allow-files-only and config/arm-allow-null-records list the known ones, and a new one of either kind fails the run until it is added.

omarchy-mirror-upload-arm uploads packages and signatures first, then the databases, then prunes what the stage no longer holds. It holds the stage lock throughout and refuses a stage whose last run was not complete, did not check signatures, or did not cover every repository in the tree. Databases are compared by checksum. Packages from the local stage are compared by time against the time R2 received its copy, which costs nothing beyond the listing; that would miss a same-name replacement stamped older than its upload, so keep the clock synced and do not restore a stage with its old timestamps. Packages above 200 MiB go up in parts with their MD5 stored on the object, so files above R2's 5 GiB single-request limit work and a promote can compare them.

rc and stable are never synced from upstream. omarchy-mirror-promote-arm copies one bucket onto another, server-side and by checksum. It refuses an empty source and copies again if the source's databases changed while it ran. A first full copy is about 27,000 objects and takes a few minutes; later ones copy only what changed. Nothing runs it on a schedule:

# When a release candidate is cut
bin/omarchy-mirror-promote-arm --from omarchy:omarchy-mirror-arm --to omarchy:omarchy-mirror-arm-rc

# On release day
bin/omarchy-mirror-promote-arm --from omarchy:omarchy-mirror-arm-rc --to omarchy:omarchy-mirror-arm-stable

bin/setup-arm installs the dependencies (a current rclone from rclone.org; the distribution's is years old), the pinned keyring and the hourly timer. R2 credentials come from /etc/omarchy-mirror/r2.env (mode 600) as RCLONE_CONFIG_OMARCHY_* variables; a token limited to the three ARM buckets also needs RCLONE_CONFIG_OMARCHY_NO_CHECK_BUCKET=true.

Cloudflare does not cache .xz, .db, .files or .sig by default, and every Arch Linux ARM package is a .pkg.tar.xz, so the three hosts need cache rules of their own: packages and signatures for a long time, databases for a minute. Both rules also need a status code TTL (400-499 for a minute, 500 and above not cached); without it a 404 for a file requested before it was uploaded stays cached long after the file exists.

Run the integration tests without network access to public mirrors:

python3 -m unittest discover -s tests -v

CI runs Python 3.9 and 3.14 plus an Arch container with pacman. The pacman test queries a published fixture database using temporary configuration, database, cache, and keyring paths; it installs nothing and does not use the host package database. These tests cover the stager only, against a local fixture server.

The published mirrors are checked separately by .github/workflows/arm-mirror-check.yml: every six hours, on an arm64 runner, pacman in an Arch Linux ARM container uses one of the three hosts and nothing else, with signatures required. It does a full upgrade, installs from extra and aur, and downloads the kernel.